WILBERS STABILIZER KIT
WILBERS STABILIZER KIT
Wilbers

WILBERS STABILIZER KIT

HARLEY-DAVIDSON

Art. No. 10062990
|

Er zijn nog geen beoordelingen.

Vind je motor:
€ 489,00 1
Beschrijving

WILBERS STABILIZER KIT HARLEY-DAVIDSON

The Wilbers Stabiliser Kit *Harley-Davidson* for Touring models from 2011 onwards puts an end to " wobbling" at higher speeds. "Come on the swing, Louise" sang the great Hans Albers (actor and singer) in the famous film "Auf der Reeperbahn nachts um halb eins" in 1954. He certainly wasn't referring to your Touring Harley-Davidson. But it is precisely the rocking, or rather the rocking up, that is an unsightly affair at higher speeds. This phenomenon occurs from around 160 km/h and can be very dangerous for you, your motorbike and other road users. The Wilbers Stabiliser Kit *Harley-Davidson* provides a remedy and safety. Small kit - big effect!

And that's why:
The Harley Touring models from 2011 onwards are designed in such a way that a thru axle connects the engine/transmission and swingarm. This thru axle is fixed in the frame via rubber bearings. This reduces vibrations, but with negative consequences at higher speeds:

  1. During load changes, engine vibrations can be transferred to the frame via the swingarm, which leads to vibrations throughout the motorbike
  2. The higher the speed, the stronger the vibrations
  3. In addition, the fact that the front engine mount is not adjustable means that the engine/swingarm unit may not be correctly aligned, resulting in a track offset from the rear wheel to the front wheel
This results in the dangerous rocking of the motorbike in conjunction with severe handlebar flapping ("death wobble"). Especially at speeds above 160 km/h and with a load. The Stabilizer Kit from suspension specialist Wilbers eliminates the suspension wobble with special inserts in the rubber-mounted swingarm and by means of the adjustable engine stabiliser, which corrects the track if necessary.
  • Rubber-mounted swingarm inserts, right and left side for replacement
  • Adjustable engine stabiliser
Scope of delivery:
  • 1 x Wilbers Stabiliser Kit *Harley-Davidson Touring*
Good to know:
After installing the components, the distance from the centre of the upper fastening screw of the rear shock absorbers to the centre of the lower fastening screw of the shock absorbers is measured and compared. If there is a difference between the right and left side, the vehicle has a track offset. This is then adjusted using the engine stabiliser (see installation instructions).

Lijst met passende motoren

Documenten
Beoordelingen
Alle varianten
Nog vragen?

Heb je een algemene vraag, een vraag over je bestelling, wil je kritiek geven of ons gewoon je mening geven? Wij zijn er graag voor je.

Persoonlijke gegevens

Ik heb een vraag...

Selecteer een optie

Kies een contactoptie

Selecteer een optie

De door jou ingestelde periode is ongeldig. Corrigeer dit a.u.b.

tussen

uur
en

uur

Door het versturen van het formulier verklaar je je akkoord met de verwerking van je persoonsgegevens overeenkomstig onze privacyrichtlijn.

Vanaf 70€ zonder verzendkosten
Teruggaverecht gedurende 2 jaar
Snelle levering
Retourzending gratis
SearchWishlistUser AccountCartArrow LeftArrow RightArrow Right ThinIcon HomeIcon HomeMenuArrowCaret DownCloseResetVISAmatercardpaypalDHLHermesCheckCheck-additionalStarAdd to Shopping Cartchevron-leftchevron-rightSpinnerHeartSyncGiftchevron-upKlarnaGridListFiltersFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoCalendar